Scale Section: For Sale and Wanted

Important Note: Advertising on the Club web site is a free service offered for private (i.e. non-commercial) model boat related sales. Buyers: While the adverts are displayed in good faith, the SRCMBC accepts no responsibility for the accuracy of descriptions on this page; check before you buy!

SCALE SECTION ADVERTS

Tug Marie FellingMay 27, 2022This is a 1/30th scale Caldercraft model of the steam tug Marie Felling which was built in 1928 for the Kenya and Uganda Railways and Harbours Board. It is a depiction of how she appeared before being broken up in the 1970’s or 80’s. Model dimensions are: length 45 inches and beam 12 inches. The model is being sold ready to go less radio Rx.: i.e. 7Ahr battery, Mtroniks speed controller, Forge Electronics engine sound simulator MK3 with speaker and 12v power distribution board are all included. Plans, instructions, documentation are also included. More photos available if required and viewings welcome. Price: £525 Contact: Paul Nixon – 074 8636 1043 or 012 0207 3028...
Read more...
6m Racing Yacht – SOLDMay 5, 2022Now SOLD: 6m Racing Yacht Sails: by PJ Transmitter and Receiver: Spectrum DX7 Situated: Lymington Price: SOLD Contact: Garry Boyd Phone: 077 5921 0968...
Read more...
Graupner TrueBlue Model Yacht – SOLDMarch 7, 2022Specifications Approx Length 1000mm Beam 220mm Height 1730mm Sail Area 0.47m squared Weight 3.8kg Scale 1:30 This model is complete but has never been sailed so needs some setting up. Included: Servos. Build and sailing instructions. Can be seen working but will need radio equipment. Offers around – SOLD Contact: Geoff Mead Tel: 01425 271 346 Email: vickigeoff.mead@btinternet.com Situated: Mudeford...
Read more...
HMS VanguardMay 13, 2021David Newsom writes: I much appreciate the offer to put out a plcture of the Vanguard to see if there might be a smidgeon of interest by any warship modeller. There are 4 low drain motors and the radio with it is a 2.4 MHz Planet 7. The model is 1/128 scale and measures 76 inches by 10 inches. Because I am 83 I find cannot use it; it’s too large for me now. I originally bought it from a club member of the Portsmouth modellers, just 3 years ago, sentimental reasons, because I served aboard Vanguard at the start of my Naval career! David is looking for an offer in the region of £650, he lives in the Portsmouth area and the buyer will need to collect. Anyone interested, please contact him by email: davidjohnnewsom@gmail.com...
Read more...
Proxxon DH40 ThicknesserApril 28, 2021I am selling my Proxxon DH40 Thicknesser/Planner as no longer needed. RRP approx £540.00 if anyone is interested from the club I would let it go for £375.00 ono. Stan McCabe Email: stan.mccabe@srcmbc.uk Phone: 01590 718988...
Read more...
New: Pilot Boat, Fishing Vessel, Motor Cruiser – from Roger YeatmanApril 27, 2021Pilot Boat ” Vandyke” with two superstructures .. one as the Nelson 42 Pilot Boat (see above) and an another rigged as the Lulworth Range Safety Boat. I have converted the power unit to two Decaperm motors with separate Electronize speed controlers to give good performance. The hull was built on fibre glass by a professional boat builder – a really strong model (more photos ) Over several years the craft has been reconditioned three times always improving the performance. Bids between £160 and £180 are required. However I would listen to any sensible off with the option of some ” extras ” such as a spare new Decaperm motor. Transmitter etc. included. Contact: roger.yeatman@srcmbc.uk Lady June Y – Scottish Fishing Vessel circa 1920: Scale Model in Plastic/Wood complete with all the R/C equipment (transmitter:40 MHZ, receiver: 4-6 channel, 2 crystals). 6 volt Gel Battery. Deck accessories. Boat Stand (Wood). Model has been tried and tested (see photos!) but has had very little use and is therefore is in good to excellent condition. Length: 100 cms. Beam:30 cms. Draught abt. 10cms. Offers around £100 Contact: roger.yeatman@srcmbc.uk Seafarer of Poole is a Sea Queen single motor cruiser with good potential and very seaworthy (more photos). say ( £75-80 ) Open to sensible offers (say £75 – £80 ). Contact: roger.yeatman@srcmbc.uk ...
Read more...
Free Offer: “The Beast”September 13, 2019Having had various unsatisfactory offers for his model of the John Fitch paddle boat, “The Beast”, Mike Sheppard is now offering the model to Club members “free to a good home”! It will need collecting from near Haverfordwest in South Wales*. The model is just under 5 foot in length and weighs about 50lbs. It is fully functional with motor, radio transmitter, a stand and two wheel trolley. To avoid breakages, it needs two people place it in water. In operation the model provides a unique and entertaining sight… watch the video which was filmed at Setley Pond! *(if a SRCMBC member is interested in owning the model but unable to collect it, I may be able to arrange for its collection – Peter Taylor info@srcmbc.org.uk ) The model is based on the first paddle steamboat designed by John Fitch in 1786 in the USA. Twelve vertical oars were connected to a steam engine in such a way that they dipped in the water for a stroke and were then lifted out and carried forwards for the next stroke. A photo of this model is displayed in the John Fitch Steamboat Museum in Warminster, Pennsylvania, USA. John Fitch later developed a cargo carrying paddle steamboat with stern mounted paddles. Price: …see above Please contact Mike on 01437 760021 if you would like more information...
Read more...